E2E-X7D1-N Omron Proximity Sensor Switch

  • Standard quality sensors to identify ferrous metals.
  • Ideal for variety of applications.
  • Available in different frequencies.E2E-X7D1-N
  • Made with oil-resistant PVC material that resists environmental damages.
  • Shock resistant E2E-X7D1-N.
  • Pre-wired models with brass-nickel plating to resist cutting E2E-X7D1-N.
  • Shielded inductive type wires with a sensing distance of 7mm, DC-2 wire models with M18 head size.
  • Instruction manual available.

E2E-X7D1-N Specifications

Detecting head size M18
Type Shielded
Sensing way Inductive type
Detecting distance 7 mm-10% to +10%
Setting distance 0 to 5.6 mm
Working mode N/O
Type Shielded
Sensing way Inductive type
Detecting distance 7 mm-10% to +10%
Setting distance 0 to 5.6 mm
Differential distance 10% Max. of sensing distance
Detecting object Ferrous metal (Sensitivity lowers with non-ferrous metals.)
Basic detecting object Iron 18 x 18 x 1 mm
Voltage 12 to 24 VDC ripple(p-p) 10% Max.
Working voltage range 10 to 30 VDC
Leakage current 0.8 mA max.
Output type DC 2-wire models with polarity
Switching capacity 3 to 100 mA
Indicator Operation indicator (red), Operation setting indicator (green)
Working mode N/O
Sensitivity setting
Self-diagnostic output
Protective circuit Surge suppressor
Output short-cut protection
Standard or Different frequency Standard
Ambient temperature Operating: -25 to 70 ℃
Storage: -40 to 85 ℃
Ambient humidity Operating: 35 to 95%RH
Storage: 3595%RH
Temperature influence +/- 10% Max. of sensing distance in temperature range of -25 to +70 CEL
(As the basis for sensing distance of 23 CEL)
Voltage influence +/- 1% Max. of sensing distance in rated voltage range +/- 15%.
(As the basis for sensing distance at standard power voltage)
Insulation resistance 50 MOhm Min. at 500 VDC between charged parts and the case
Dielectric strength 1000 VAC 50/60 Hz for 1 minute between charged parts and the case
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance 1000 m/s**2 for 10 times each in X, Y, and Z directions
Protection degree IEC60529: IP67
Company standard: Oil-proof
Connection method Pre-wired models(Cable length: 5 m)
Weight (Packed state) approx. 265 g
Material (case) Brass nickel plating
Material (sensing surface) PBT
Material (clamping nuts) Brass nickel plating
Material (toothed washer) Iron zinc plating
Accessories Instruction manual

E2E-X7D1-N Related:E2K-C25ME1